Strymon Conduit Midi Hub

Strymon Conduit MIDI Interface; a MIDI interface that will work with most 1/4" TRS-Jack MIDI equipped effects pedals; independently configurable to work with a variety of 1/4" TRS-Jack MIDI communication modes; send MIDI control change messages from a sequencer to sync pedal parameter changes, automate pedal preset changes, load and save presets, or send SysEx messages—all from your computer; Sending MIDI messages from your MIDI controller or interface to Conduit will now distribute these messages to devices connected to the 1/4" TRS jacks and 5 pin DIN MIDI OUT port, All MIDI data received at the 1/4" jacks from the pedals are merged and sent to the 5 pin DIN MIDI port; Controls: ; Push Buttons: ; LED: Effect On; Display: ; Footswitches: Effect Bypass; Connections: MIDI In & Out (2 x 5-PIN DIN); MIDI 1-4 (4 x 1/4"m TRS-Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; Current Draw: 50 mA; powered by a 9 V DC Power Supply (not included); suitable optional Power Supply: Item no. #409939; Dimensions (W x D x H): 90 x 72 x 38 mm (3,54" x 2,83" x 1,5"); Weight: 141 g (0,31 lbs); Made in USA; Note: Battery operation is not supported

FEATURES/SPECS

• One opto-isolated 5-pin DIN MIDI interface (IN and OUT ports)
• Four 1/4″ TRS bi-directional MIDI ports
• Five MIDI status indicator LEDs
• One USB Type-C to USB-A Male cable
• Lightweight, compact anodized aluminum chassis with threaded mounting hardware
• Weight: 5 oz (141 g)
• Dimensions: 2.63″ deep x 3.5″ wide x 1.2″ tall (7.2 cm deep x 9 cm wide x 3.8 cm tall)